Télécharger le mod Kroeger PWO 24 Bale Autoload Farming Simulator 22

Kroeger PWO 24 Bale Autoload
Price: from 21500$
Category: Bale transport

* Standard or bale autoload configuration
* Autoload for
– round bales (125cm: 26 bales, 150cm: 22 bales, 180cm: 18 bales, cotton: 4 bales)
– square bales (180cm: 30 bales, 220cm & 240cm: 24 bales, Hesston 180cm: 20 bales, 220cm & 240cm: 16 bales (mod balers), Krone BigPack 1270 180cm: 40 bales, 220cm & 240cm: 32 bales (mod baler), Cotton: 2 bales
* The autoload functions Pro and Easy can be switched – ANYTIME – via « Change work mode » (« Ctrl »+ »Z »). Default setting is EASY. Unloading via mouse control is only possible when unloading assistant is activ.
– Easy with wide loading trigger (approx. 4m per side).
– Pro, here the bales must be placed on the trailer.
* 3 body designs to choose from
* each side of the body can be opened separately or both sides at the same time (« U » key to select the loading side, « Y » key to open/close)
* unloading assistant can be activated (« O » key)
* Color choice for trailer & rims
* Tire choice (Continental, Trelleborg, BKT, Vredestein, Nokian, Lizard)
* New rear lights
* Configurable beacons (none, left, right, left & right)
* additional sounds when coupling / uncoupling
* Supports « Universal Autoload » (by loki_79) in « Standard » configuration (PC only)
* Supports « Selectable Bale Capacity Addon » (by GH66Mods)
* Supports « Liftable bales pack » (by Jos)
* Supports Hesston Bales 180cm, 220cm & 240cm (Mod balers by 4D Modding / ARM-Team)
* Supports Krone Big Pack 1270 Bales 180cm, 220cm & 240cm (Mod baler by H3RBY)

How the bale autoload works:

1. Bring the trailer into the working position with « B », the bales can now be collected.
– In the « EASY » working mode, the trailer collects bales that are up to 4 metres away from the trailer independently.
– In « PRO » working mode, the bales must be placed on the trailer in order to be collected by the autoload.
The working mode can be changed at any time by pressing « Ctrl »+ »Z ».

2. After collecting, move the trailer to the transport position with « B ».

3. Start the unloading mode for unloading with « Z ».
– Unloading can only be carried out on the trailer without an unloading assistant. The bales can then be removed from the trailer manually, e.g. with a front loader.
– By activating the unloading assistant « O », the bales can be moved in all directions and rotated on all axles.
Select the unloading location and unload the bales with « Z ».
After unloading, end the unloading process with « Z ».
The unloading process can be cancelled with « X ».

Bale autoload only works if this is configured in the garage.

Chancelog 1.1.0.1

– dynamicMountAttacher removed, as it caused problems

Chancelog 1.1.0.0

– the loading side can now be selected during assembly (« U » key to select the side, « Y » key to open / close)
– unloading assistant can now be deactivated / activated (« O » key)
– configuration for beacons added
– UAL debug mode deactivated
– Added Krone Big Pack 1270 square bale support (Mod baler by H3RBY)